Filter Rigs for workshop and industrial deployment

The KLEENOIL filter rigs of the production series 4S-700B/E to 9S-2200E are suitable for the cleaning and filling of systems with medium or large oil volumes (500 to 20,000 liters). The filtration time depends on the viscosity and the level of fluid contamination.

The KLEENOIL filter rigs are based on the established KLEENOIL filter technology. Solid particles down to 1um are filtered out; water will be absorbed from the oil and bound in the filter cartridge.

FILTER CARTRIDGES:
With the standard SDFC filter cartridges all mineral oil based and synthetic, non-water soluble lubricating and hydraulic oils up to 200 cST. (Indication of performance at 40 cST.) As well as diesel fuels, RME and fuel oil can be filtered. For filtration of water mixable fluids SDFC-P cartridges have to be used.

The KLEENOIL BSR filter rigs have been developed for the automatic cleaning of oil in systems that are used seldom, as is often the case in hydraulic lock gates or flood prevention barriers.

Rarely used systems often have the problem that the hydraulic fluids become contaminated due to long stand by and short operating times. A frequent problem in water contamination which could either be caused by the condensate or it can get in to the systems via the pistons rods of the hydraulic cylinders.

The KLENOIL BSR filter rig can include a connection for remote control.

Additionally a surveillance sensor to monitor water contamination (BSRW) can be installed.

The KLEENOIL filter rig CWF400-1 and 2 have been developed for the filtration of non-water soluble fully and partly synthetic or mineral oil based oils, in cases of applications where there is a high level of water contamination.

The KLEENOIL filter rig CWF400-1 and 2 therefore contain a mechanical water –oil-separator and additionally 4 clean oil SDU filter units. These filters rigs also include a programmable control ( PLC ), which is connected to the built-in water meters and the pressure switches.

RECOMMENDATION:
Depending on the initial level of contamination repeated passes of the oil volume through the system are necessary in order to reach the best possible cleanliness class.

  1. 4S-700E
  2. 4S-700EPH
  3. 6S-1500E
  4. 9S-2200E
  5. CWF400-1

4S-700E

Motors

     
       
  Volt   230 / 400
  KW   0.37
  Amps   4/1.3
  RPM   1425
  Protection   IP 55
       

Performance

   
       
  Filtration/Liters/h 40cSt.   700/2.6 bar
  Pump Transfer/Liters/h 40 cSt.   1600
  Temperature Range   10-60 C
  Suction Lift   5.5 m
       

Size

     
       
  Length.   875 mm
  Width   595 mm
  Height   1000 mm
  Without Handles   780 mm
  Weight   95 kg
       

Filter

     
       
  Housing Type   4 x SDUFB-C
  Cartridge type: micro cartirage   4 X SDFC
  Pre-filter: small-fitted , large-fitted
  PF 34 NPT, -
       
  Special Options   3-phase motor
Large suction per-filter
Flow meter

4S-700EPH

Motors

     
       
  Volt   110 / 230
  KW   0.18
  Amps   5.1 / 2.2
  RPM   1425
  Protection   IP 65
       

Performance

   
       
  Filtration/Liters/h 40cSt.   700/2.6 bar
  Pump Transfer/Liters/h 40 cSt.   1600
  Temperature Range   10-60 C
  Suction Lift   5.5 m
       

Size

     
       
  Length.   910 mm
  Width   590 mm
  Height   1000 mm
  Without Handles   780 mm
  Weight   120 kg
       

Filter

     
       
  Housing Type   4 x SDUFB-C
  Cartridge type: micro cartirage   4 X SDFC
  Pre-filter: small-fitted , large-fitted
  -, -
       
  Special Options   Flow meter

6S-1500E

Motors

     
       
  Volt   230 / 400
  KW   0.37
  Amps   4 / 1.3
  RPM   1425
  Protection   IP 65
       

Performance

   
       
  Filtration/Liters/h 40cSt.   1500/2.6 bar
  Pump Transfer/Liters/h 40 cSt.   1600
  Temperature Range   10-60 C
  Suction Lift   5.5 m
       

Size

     
       
  Length.   1180 mm
  Width   595 mm
  Height   1000 mm
  Without Handles   780 mm
  Weight   115 kg
       

Filter

     
       
  Housing Type   6 x SDUFB-C
  Cartridge type: micro cartirage   6 X SDFC
  Pre-filter: small-fitted , large-fitted
  - , PRE GO.9
       
  Special Options   3-phase motor Flow meter

9S-2200E

Motors

     
       
  Volt   230
  KW   1.1
  Amps   4.6
  RPM   1425
  Protection   IP 55
       

Performance

   
       
  Filtration/Liters/h 40cSt.   2200/2.6 bar
  Pump Transfer/Liters/h 40 cSt.   3000
  Temperature Range   0-80 C
  Suction Lift   5.5 m
       

Size

     
       
  Length.   1200 mm
  Width   820 mm
  Height   1000 mm
  Without Handles   818 mm
  Weight   230 kg
       

Filter

     
       
  Housing Type   9 x SDUFB-BC
  Cartridge type: micro cartirage   9 X SDFC
  Pre-filter: small-fitted , large-fitted
  - , PRE GO.9
       
  Special Options   3-phase motor Flow meter

CWF 400-1

Motors

     
       
  Volt   230
  KW   0.18
  Amps   2.2
  RPM   1425
  Protection   IP 55
       

Performance

   
       
  Filtration/Liters/h 40cSt.   - -
  Pump Transfer/Liters/h 40 cSt.   500
  Temperature Range   10-90 C
  Suction Lift   5.5 m
       

Size

     
       
  Length.   1380 mm
  Width   720 mm
  Height   --- mm
  Without Handles   1170 mm
  Weight   165 kg
       

Filter

     
       
  Housing Type   2x CWF/4 x SDUFB-BN
  Cartridge type: micro cartirage  

2 X CWF Element /
2 X 6RZ10
4 X SDFC

  Pre-filter: small-fitted , large-fitted
  -, -
       
  Special Options   -